spec no: dsad0940 rev no: v.5 date: mar/18/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000196 package dimension s description the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode . AP2012SYCK super brigh t yellow 2.0x1.25mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. features 2.0mmx1.25mm smt led,1.1mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant.
spec no: dsad0940 rev no: v.5 date: mar/18/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000196 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 AP2012SYCK super bright yellow (ingaaip) water clear 18 120 120 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 175 ma reverse voltage 5 v operating / storage temperature - 40c to +85c symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 20 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v
spec no: dsad0940 rev no: v.5 date: mar/18/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000196 super bright yellow AP2012SYCK
spec no: dsad0940 rev no: v.5 date: mar/18/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000196 AP2012SYCK recommended soldering pattern (units : mm ) tape specifications (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
